Optimized fiber routing for maximum brightness
The SLS 3D printing technology allows a completely free fiber routing without restrictions due to the manufacturing process. This allows the optical fiber to be guided into the Hubble Scope housing without kinks, sharp edges or small bending radii. In this way, the Hubble Scope always achieves maximum brightness.
The blue fiber is recommended for outdoor use only. The required wavelengths are hardly contained in artificial light. As a result, the luminosity of the blue fiber indoor is lower.
Bridgeless fiber mount
The fiber is held by a highly transparent, cast PMMA lens without magnification. Thus there is no disturbing bridge in your field of view. There is an O-ring in front of and behind the lens for fixation.
Insertable aperture rings
Optionally, you can order three standard aperture rings with a diameter of 12, 10 and 8 mm. In addition, we offer aperture rings with individual diameter. This is particularly advantageous for field shooting, as the aperture can be perfectly adjusted to the distance between the eye and the sight. The aperture rings are fixed in the housing with an additional O-ring and can therefore be quickly replaced at any time.
Minimum weight
The housing consists of laser-sintered polyamide and is therefore extremely light. The low weight reduces vibration and stress in the sight.
Position | number | part number | name |
1 | 1 | 303 002 | scope housing |
2 | 1 | 303 003 | 8-32 threaded rod |
4 | 1 | 303 004 | Lense |
5 | 1 | 303 005 | locking nut |
6 | 2 (3) | 303 006 | O-Ring |
9.1 | (1) | 303 008 | Aperture Ring Ø 8 mm |
9.2 | (1) | 303 010 | Aperture Ring Ø 10 mm |
9.3 | (1) | 303 012 | Aperture Ring Ø 12 mm |